Electric Gate Repair Man
Electric Gate Repair Man
If you need an electric gate repair man near you, we can help. Gate Repairer Ltd diagnose and repair automatic gates for homes, estates, businesses and managed sites.
First, we identify the system type and controller. Then we test safety inputs and the power supply. After that, we confirm whether the fault is electrical, mechanical, or both. Finally, we repair and test the gate so it runs smoothly, consistently, and safely.
If your gate works “sometimes”, the cause is usually measurable. Therefore, we test properly so you don’t waste money on the wrong parts.
Electric gate repairs done properly.
Motors, control boards, remotes, receivers, photocells, safety edges, loops, intercom triggers, cabling and commissioning checks.
Motors, control boards, remotes, receivers, photocells, safety edges, loops, intercom triggers, cabling and commissioning checks.
Same-day and within-the-hour emergency call-outs available where possible.
If your gate is stuck shut, stuck open, or unsafe, call for priority help.
Local Electric Gate Repair Specialist
An electric gate system is more than a motor. It includes a controller, safety devices, access control triggers, cabling, and the gate’s moving structure. Therefore, accurate fault finding matters.
We repair electric gates with a safety-led approach. In addition, we can upgrade older systems to improve reliability and reduce nuisance faults. As a result, you get dependable access and fewer breakdowns.
Targeted diagnosisWe test inputs, outputs, and safety circuits before swapping parts.
Correct partsMatched to the system, voltage, and duty cycle.
Safer operationPhotocells, edges, forces and stop/reverse behaviour checked.
Clear next stepsYou’ll know what failed, why it failed, and what to do next.
Why Choose Gate Repairer Ltd
5 Star Google reviews
Same-day & within-the-hour emergency call-outs
3-year guarantee (if serviced yearly)
Fully insured
Safety-first approach
Automatic gate specialists
Compliance and H&S matters.
We work with a safety-led approach aligned with PUWER 1998, the Supply of Machinery (Safety) Regulations 2008, relevant BS EN standards (including 12453/12445), and HSE electric gate safety guidance.
We work with a safety-led approach aligned with PUWER 1998, the Supply of Machinery (Safety) Regulations 2008, relevant BS EN standards (including 12453/12445), and HSE electric gate safety guidance.
Because a “dead” gate can be caused by safety circuits, not just motors, we confirm the blocking input first. Then we repair the real issue. As a result, the gate returns to stable operation without guesswork.
Areas We Cover
We support electric gate repairs across a wide radius. If you’re unsure, call us with your postcode and we’ll confirm availability.
BuckinghamshireHomes, estates, schools and businesses.
OxfordshireUrban and rural automation support.
BerkshireCommuter belt and high-use sites.
HertfordshireResidential and commercial coverage.
BedfordshireRepairs, servicing and upgrades.
NorthamptonshireSelected areas by access and distance.
Greater LondonWest/North coverage by route.
Parking, tolls, congestion and ULEZ charges are charged at cost where applicable.
Electric Gate Systems We Repair
Electric gate repairs vary by system type. Therefore, we match diagnostics and parts to the exact setup. That way, the fix is durable, not temporary.
Swing Gate Automation
Arms, rams and underground motors.
We check hinges, geometry, limits, forces and safe reverse response.
Sliding Gate Automation
Rack-and-pinion systems on tracked and cantilever gates.
We check rollers, rack alignment, run-back and safety edges.
Underground Gate Motors
Neat appearance with strong drive.
We check foundations, drainage, release systems and cable integrity.
Control & Safety
Control boards, receivers, loops, photocells, safety edges and intercom triggers.
We test inputs and confirm safe response.
Not sure what system you have?
If safe, send a clear photo of the controller label and a short video of the fault. We’ll advise quickly.
If safe, send a clear photo of the controller label and a short video of the fault. We’ll advise quickly.
What We Check on a Call-Out
A gate is a system, not just a motor. Therefore, we check the full chain from power to movement. This reduces repeat faults.
- Power and protection: supply, isolators, fuses, transformer outputs and enclosure condition
- Control logic: board status, settings, inputs, outputs and fault indicators
- Safety inputs: photocells, safety edges, loop detectors, stop circuits and wiring integrity
- Drive components: motor condition, brackets, hinges/rollers, rack alignment and mechanical resistance
- Access control: remotes, receivers, antennas, keypads, intercom relays and cabling
- Commissioning checks: force behaviour, stop/reverse response, limits and smooth travel
As a result, you get a repair that restores operation and improves reliability.
Common Electric Gate Problems We Fix
Gate faults can look similar, even when the causes are different. However, testing separates a safety hold-off from a motor or control failure. That’s why we follow a consistent diagnostic order.
Gate won’t open or closePower/fuse faults, safety circuit active, board failures.
Stops halfway or reversesResistance, force settings, hinge/roller drag, safety triggers.
Remote works intermittentlyReceiver/antenna faults, interference, wiring issues.
Photocells not respondingMisalignment, water ingress, vandalism damage, broken cables.
Beeping but no movementSafety input preventing movement or control lockout.
Noisy or slow movementMechanical resistance, worn components, motor fatigue.
Both gates stop togetherController/power issue, safety circuit issue, shared wiring fault.
Gate drags on the groundHinge drop, post movement, roller wear or foundation issues.
Therefore, if your gate is behaving unpredictably, stop using it and call us for advice.
Who We Help
We support homeowners and businesses. In addition, we help property managers and facilities teams who need safe, documented repairs.
HomeownersReliable access, smoother travel, safer daily use.
Estates & Managed SitesMultiple users, controlled access and planned maintenance.
BusinessesTraffic flow, deliveries and higher duty cycles.
Property & Facilities ManagersClear next steps and safety-first recommendations.
Electric Gate Safety and Compliance
Electric gates are machinery. Therefore, safety devices and correct settings matter. We check key safety functions and advise on any gaps.
Safety edgesReduce crush and shear risks at pinch points.
PhotocellsDetect people and vehicles, preventing unsafe movement.
Force behaviourCorrect stop/reverse settings reduce impact risk.
Manual releaseRelease keys and safe access in a fault condition.
If a safety device is missing or not working, the gate may be unsafe.
We can repair, replace or upgrade safety devices, then test and commission correctly.
We can repair, replace or upgrade safety devices, then test and commission correctly.
Emergency Electric Gate Repairs
If your electric gate is stuck open, stuck shut, or creating a safety risk, call us. First, we make it safe. Then we restore reliable operation. After that, we advise on improvements to reduce repeat failures.
Keep people clear of moving parts until the gate has been made safe.
Call-Out Charges & Pricing
What the Call-Out Covers
The call-out includes travel, diagnostics, and the first hour on site. Therefore, many faults are resolved within the included time.
✓
Diagnostics & testing
✓
Safety input checks
✓
Control & settings checks
✓
Clear next steps
Standard Labour Rate
£80 + VAT per hour
Diagnostics, repairs, safe testing and fault finding.
Call-Out Rates
Standard Call-out
Mon–Fri 9–5pm
£160 + VAT
Includes travel + first hour on site.
Additional hours after the first hour: £80 + VAT/hr
Out of Hours Call-out
Evenings & weekends
£320 + VAT
Includes travel + first hour on site.
Additional hours after the first hour: £160 + VAT/hr
Bank Holiday Call-out
Christmas, Easter & bank holidays
£480 + VAT
Includes travel + first hour on site.
Additional hours after the first hour: £240 + VAT/hr
Key Info
Transparent pricing — we confirm costs before work starts.
Congestion/ULEZ/parking/tolls charged at cost where applicable.
Parts and upgrades confirmed before supply and fit.
Electric Gate Repair Man FAQs
Getting the Right Fix
What does an electric gate repair man actually check?
We test the system in a safe diagnostic order.
First, power supply and protection.
Then safety inputs (photocells, edges, stop circuits).
After that, control board outputs and motor response.
Finally, mechanical resistance like hinges, rollers, rack alignment and drag.
My gate has power but won’t move. What does that usually mean?
Often, a safety input is holding the gate off.
For example, photocells, a safety edge, a stop circuit, or a loop detector can prevent movement.
Therefore, we test the safety chain before changing parts.
Why does my gate stop halfway or reverse?
Usually the system is detecting resistance or a safety device is triggering.
For example, hinge or roller drag, rack misalignment, force settings, or photocell issues.
Therefore, we test mechanics and safety inputs to find the real cause.
Can you repair older gate systems?
In many cases, yes.
First, we identify the controller and motor type.
Then we confirm parts availability.
If a part is obsolete, we recommend a safe upgrade path to restore reliability.
Safety, Servicing & Access
Do you upgrade safety devices like photocells and safety edges?
Yes.
We can add or replace photocells and safety edges, then commission the system so it stops or reverses correctly.
This is especially important on older installations.
How often should an electric gate be serviced?
At least annually for most homes.
However, higher-use sites often need more frequent servicing.
Servicing reduces failures and helps the gate operate smoothly and safely.
Can you fix remote range and supply new remotes?
Yes.
First we test the remote and receiver.
Then we check the antenna, cabling, and interference.
If the receiver is obsolete, we can upgrade it and supply new remotes.
Can you integrate keypads, intercoms, or GSM diallers?
Yes.
We can diagnose and wire access control devices into the control board correctly.
In addition, we can tidy wiring and protect connections to improve reliability.
Response & Costs
Do you offer emergency electric gate repairs?
Yes.
Same-day and emergency call-outs are available where possible.
If your gate is stuck open, stuck shut, or unsafe, call us for priority help.
How much does a call-out cost?
Our call-out pricing is clear:
- Standard hours: £160 + VAT includes travel and the first hour
- Out of hours: £320 + VAT includes travel and the first hour
- Bank holidays: £480 + VAT includes travel and the first hour
What information should I send before you attend?
Your postcode, gate type (swing or sliding), and what the gate is doing.
If safe, a short video of the fault and a photo of the controller label helps us diagnose faster.
As a result, we can arrive with the right parts where possible.
Request a Quote / Callout
Tell us what’s happening and we’ll respond quickly. For the fastest help, include your postcode, gate type (swing/sliding), and any controller or motor model details if known.
Fast booking options
Or email: info@gaterepairer.co.uk
Tip: If safe, a short video of the gate opening/closing and a photo of the control panel label helps us diagnose faster.
