Electric Gate Repair & Servicing Haslemere

Electric Gate Repair and Servicing Haslemere

If your electric gate in Haslemere is not opening, not closing, stopping halfway, reversing unexpectedly, or due a service, we can help. Gate Repairer Ltd provide safety-led diagnostics, repairs and servicing for swing and sliding gate automation across Haslemere and the surrounding Surrey and West Sussex border area.

Gates in Haslemere often protect private homes, country properties, large driveways, gated entrances, managed residences and business premises. That means reliability, security and safe operation all matter. Therefore, we diagnose faults properly before replacing parts.

First, we identify the gate type and control equipment. Then we test the power supply and all key safety inputs. After that, we confirm whether the issue is mechanical, electrical, servicing related, or access-control related. Finally, we repair, service, test and commission the system so it runs smoothly and safely.

Electric gate repairs and servicing done properly.
Motors, control boards, receivers, remotes, photocells, safety edges, loops, intercom triggers, cabling, routine servicing and commissioning checks.
Same-day and within-the-hour emergency call-outs available where possible. If your gate is stuck open, stuck shut, damaged, unsafe, or overdue a service, call for priority help.

Haslemere Electric Gate Repair and Servicing Specialists

Electric gate faults can be misleading. A gate that appears dead may actually be held off by a safety input, not a failed motor. Likewise, a gate that reverses or stops may be reacting to resistance, alignment issues, or a photocell or edge fault. Therefore, accurate diagnostics matter.

We repair and service automation with a safety-led approach. In addition, we can improve older installations with better protection, tidier wiring, safer devices and more reliable access control integration. As a result, you get more dependable operation and fewer repeat breakdowns.

Targeted diagnosisInputs, outputs and safety circuits checked before parts are replaced.
Professional servicingMotors, hinges, rollers, controls and safety devices checked and maintained.
Safer operationStop/reverse behaviour, forces, edges and photocells checked.
Clear next stepsYou’ll know what failed, why it failed, and what to do next.

Why Choose Gate Repairer Ltd

5 Star Google reviews 74+ Google reviews Same-day & within-the-hour emergency call-outs 3-year guarantee (if serviced yearly) Fully insured Safety-first approach Automatic gate specialists
Compliance and H&S matters.
We work with a safety-led approach aligned with PUWER 1998, the Supply of Machinery (Safety) Regulations 2008, relevant BS EN standards (including 12453/12445), and HSE electric gate safety guidance.

Because gates in Haslemere can include underground motors, access control, intercoms, loop detectors, safety devices and long driveway entrances, we check the full system. That includes control logic, safety devices, power supply, access control and mechanical resistance. As a result, repairs and servicing are carried out properly.

Haslemere Electric Gate Repair and Servicing Area Map

The map below shows Haslemere and nearby areas we commonly cover for electric gate repairs and servicing. If you are just outside the area, call with your postcode and we’ll confirm availability.

Parking, tolls and any applicable charges are charged at cost where applicable. We confirm call-out pricing before dispatch.

Areas We Cover Around Haslemere

We cover Haslemere and nearby areas for electric gate repairs and servicing, including private homes, estates, managed sites and commercial premises. If you searched for “electric gate repairs near me” or “electric gate servicing near me” in Haslemere, we can usually attend quickly depending on route and urgency.

HaslemereDiagnostics, repairs, servicing and safety upgrades.
GrayswoodSwing and sliding gate repairs and servicing.
HindheadAutomation faults, access control and safety devices.
FernhurstController faults, remotes and system diagnostics.
ChiddingfoldPhotocells, edges and safety circuit issues.
ShottermillEmergency call-outs, repairs and maintenance.
WitleyDriveway gate faults and reliability fixes.
LiphookSliding gates, rollers and racking faults.
MidhurstEstate gates and access control integration.
If your town, village or estate is not listed, call anyway. Coverage is route-based and we can often include nearby locations.

Electric Gate Systems We Repair and Service in Haslemere

Electric gates fail for different reasons depending on the gate type, site conditions and duty cycle. Therefore, we match repairs, servicing and parts to the exact system type. That way, the fix is durable, not temporary.

Swing Gate AutomationRams, arms and underground motors for residential and estate swing gates. We check geometry, hinge resistance, limits and safe reverse behaviour.
Sliding Gate AutomationRack-and-pinion systems on tracked or cantilever gates. We check rollers, track, rack alignment, run-back and safety edges.
Control Panels & ElectronicsBoards, fuses, relays, capacitors, transformers and wiring integrity. We test inputs, outputs and fault indicators.
Safety & Access ControlPhotocells, safety edges, loop detectors, intercom triggers, keypads and GSM diallers. We confirm correct stop/reverse response.
Not sure what you have?
If safe, send a clear photo of the controller label and a short video of the fault. We’ll advise quickly.

What We Check on an Electric Gate Call-Out or Service Visit

An electric gate is a system, not just a motor. Therefore, we check the full chain from power to movement to safety and access control. This reduces repeat faults and avoids unnecessary part changes.

  • Power and protection: supply, isolators, fuses, transformer outputs, enclosure sealing and water ingress signs
  • Control logic: board status, settings, inputs, outputs, fault indicators and safe reaction behaviour
  • Safety inputs: photocells, safety edges, loop detectors, stop circuits and wiring integrity
  • Drive components: motor condition, hinges/rollers, rack alignment, track condition and mechanical resistance
  • Access control: remotes, receivers, antennas, keypads, intercom relays and cabling
  • Servicing checks: lubrication points, fixings, wear, covers, water ingress and manual release operation
  • Commissioning checks: forces, limits, slow-down, stop/reverse response and smooth travel

As a result, you get a repair or service visit that improves reliability and safety.

Common Electric Gate Problems We Fix

Faults often look similar even when causes are different. However, testing separates a safety hold-off from a motor or controller failure. That’s why we follow a consistent diagnostic order.

Gate won’t open or closeSupply/fuse faults, safety circuit active, board failures.
Stops halfway or reversesResistance, drag, force settings, safety triggers.
Remote works intermittentlyReceiver/antenna faults, interference, wiring issues.
Photocells not respondingMisalignment, water ingress, impact damage, broken cables.
Gate beeps but does not moveSafety input preventing movement or control lockout.
Noisy or slow movementMechanical resistance, worn rollers, hinge issues.
Service overdueWorn parts, dry hinges, loose fixings and unsafe operation.
Gate drags or hits groundHinge drop, post movement, track wear or foundation issues.
Therefore, if your gate is behaving unpredictably, stop using it and call us for advice.

Who We Help With Electric Gate Repairs and Servicing

We support homeowners and businesses across Haslemere and the surrounding area. In addition, we help property managers and facilities teams who need safe, documented repairs, servicing and clear next steps.

HomeownersReliable access, smoother travel and safer daily use.
Estates & Managed SitesMultiple users, controlled access and planned maintenance.
BusinessesTraffic flow, deliveries and higher duty cycles.
Property & Facilities ManagersClear next steps and safety-first recommendations.

Electric Gate Safety and Compliance

Electric gates are machinery. Therefore, safety devices, correct settings and safe stop/reverse behaviour matter. We check key safety functions and advise on any gaps during repair and servicing visits.

Safety edgesReduce crush and shear risks at pinch points.
PhotocellsDetect people and vehicles, preventing unsafe movement.
Force behaviourCorrect stop/reverse response reduces impact risk.
Manual releaseRelease keys and safe access in fault conditions.
If a safety device is missing or not working, the gate may be unsafe.
We can repair, replace or upgrade safety devices, then test and commission correctly.

Emergency Electric Gate Repair Haslemere

If your gate is stuck open, stuck shut, damaged, or creating a safety risk, call us. First, we make it safe. Then we restore reliable operation. After that, we advise on servicing or improvements to reduce repeat failures.

Keep people clear of moving parts until the gate has been made safe.

Call-Out Charges & Pricing

What the Call-Out Covers

The call-out includes travel, diagnostics, and the first hour on site. Therefore, many faults are resolved within the included time.

Diagnostics & testing
Safety input checks
Control & settings checks
Clear next steps
Standard Labour Rate

£80 + VAT per hour
Diagnostics, repairs, servicing, safe testing and fault finding.

Call-Out Rates

Standard Call-out

Mon–Fri 9–5pm
£160 + VAT
Includes travel + first hour on site.
Additional hours after the first hour: £80 + VAT/hr

Out of Hours Call-out

Evenings & weekends
£320 + VAT
Includes travel + first hour on site.
Additional hours after the first hour: £160 + VAT/hr

Bank Holiday Call-out

Christmas, Easter & bank holidays
£480 + VAT
Includes travel + first hour on site.
Additional hours after the first hour: £240 + VAT/hr

Key Info

Transparent pricing — we confirm costs before work starts.
Parking/tolls and any applicable charges are charged at cost where applicable.
Parts, servicing recommendations and upgrades are confirmed before supply and fit.

Gate Repairer Ltd Google Reviews

Gate Repairer Ltd is proud to have a 5 Star Google rating with 74+ Google reviews. Customers regularly leave feedback for our electric gate repairs, servicing, safety upgrades, automation work and emergency call-outs.

Our Google Rating

★★★★★
5 Star Google rating
Based on 74+ Google reviews

Read Our Reviews On Google

View our Google business profile to see the latest reviews, star rating and customer feedback.

Electric Gate Repair and Servicing Haslemere FAQs

Do you repair and service electric swing and sliding gates in Haslemere?
Yes. We repair and service electric automation on swing gates and sliding gates across Haslemere.
My electric gate has power but won’t move. What does that usually mean?
Often, a safety input is holding the gate off. We test the full safety chain before changing parts.
Why does my gate stop halfway or reverse?
Usually the system is detecting resistance or a safety device is triggering. We test both mechanics and safety inputs.
Can you repair older gate control panels and obsolete systems?
In many cases, yes. If parts are obsolete, we recommend a safe and reliable upgrade path.
Do you replace photocells and safety edges?
Yes. We repair or replace photocells and safety edges, then test the gate correctly.
How often should an electric gate be serviced?
At least annually for most homes. Higher-use gates often need more frequent servicing.
Do you offer emergency electric gate repairs in Haslemere?
Yes. Same-day and emergency call-outs are available where possible.

Request a Quote / Callout

Tell us what’s happening and we’ll respond quickly. For the fastest help, include your postcode, gate type, and any motor/controller details if known.

Fast booking options

Call 01296 914284

Or email: info@gaterepairer.co.uk

Tip: If safe, a short video of the gate opening/closing and a photo of the control panel label helps us diagnose faster.
came safe

    Quick Quote / Call Back

    Fields marked Required help us book you in quickly. Everything else is optional.



    Who should our engineer ask for?



    We send confirmations here.



    Best number for call-back.



    Please choose the closest match.



    Used for travel time, callout priority and booking.



    Helps us bring the right parts.



    Often written on the motor or cabinet label.



    Usually inside the control box.



    Only if this is a business or managed site.




    The more detail you provide, the faster we can diagnose and bring the correct parts.




    Take a clear photo of the gate motor / this could be on the back of the gate or in the ground.




    Photo inside the control box, showing the control board helps diagnosis (only if safe).