Electric Gate Repair Great Tew | Automatic Gate Engineers
Electric Gate Repair Great Tew
If your electric gate in Great Tew is not opening, not closing, stopping halfway, reversing unexpectedly, or working “sometimes”, we can help. Gate Repairer Ltd provide safety-led diagnostics and repairs for swing and sliding gate automation in and around Great Tew.
Gates in this area often serve country houses, estate entrances, farm properties, converted barns and private drives. That means reliability matters. Therefore, we diagnose faults properly before changing parts.
First, we identify the control panel and gate type. Then we test the power supply and safety inputs. After that, we confirm whether the issue is mechanical, electrical, or access-control related. Finally, we repair, test and commission the system so it runs smoothly and safely.
Electric gate repairs done properly.
Motors, control boards, receivers, remotes, photocells, safety edges, loops, intercom triggers, cabling and commissioning checks.
Motors, control boards, receivers, remotes, photocells, safety edges, loops, intercom triggers, cabling and commissioning checks.
Same-day and within-the-hour emergency call-outs available where possible.
If your gate is stuck open, stuck shut, damaged, or unsafe, call for priority help.
Great Tew Electric Gate Repair Specialists
Electric gate faults can be misleading. A “dead” gate is often caused by a safety circuit holding the system off, not a failed motor. Similarly, a gate that reverses may be reacting to resistance, misalignment, or a photocell or edge input. Therefore, accurate diagnostics matter.
We repair automation with a safety-led approach. In addition, we can improve older installations with better protection, cleaner wiring, safer devices and reliable access control integration. As a result, you get consistent operation and fewer repeat breakdowns.
Targeted diagnosisInputs, outputs and safety circuits checked before parts are replaced.
Correct partsMatched to the system type, controller and duty cycle.
Safer operationStop/reverse behaviour, forces, edges and photocells checked.
Clear next stepsYou’ll know what failed, why it failed, and what to do next.
Why Choose Gate Repairer Ltd
5 Star Google reviews
Same-day & within-the-hour emergency call-outs
3-year guarantee (if serviced yearly)
Fully insured
Safety-first approach
Automatic gate specialists
Compliance and H&S matters.
We work with a safety-led approach aligned with PUWER 1998, the Supply of Machinery (Safety) Regulations 2008, relevant BS EN standards (including 12453/12445), and HSE electric gate safety guidance.
We work with a safety-led approach aligned with PUWER 1998, the Supply of Machinery (Safety) Regulations 2008, relevant BS EN standards (including 12453/12445), and HSE electric gate safety guidance.
Because gates around Great Tew and the surrounding Oxfordshire villages can be affected by weather exposure, water ingress, cable damage, controller issues and mechanical wear, we check the whole system. That includes safety devices, control logic, cabling, and mechanical resistance. As a result, repairs last longer and faults do not repeat unnecessarily.
Great Tew Electric Gate Repair Area Map
The map below shows Great Tew and nearby areas we commonly cover for electric gate repairs. If you are just outside the area, call with your postcode and we’ll confirm availability.
Parking, tolls and any applicable charges are charged at cost where applicable.
We confirm call-out pricing before dispatch.
Areas We Cover Near Great Tew
We cover Great Tew and surrounding areas for electric gate repairs, including private homes, estates, managed sites and commercial premises. If you searched “electric gate repairs near me” in this area, we can usually attend quickly depending on route and urgency.
Little TewDiagnostics, repairs and safety upgrades.
Hook NortonSwing & sliding gate repairs and servicing.
Chipping NortonAutomation faults, access control and safety devices.
Middle BartonController faults, remotes and system diagnostics.
Duns TewPhotocells, edges and safety circuit issues.
Sandford St MartinEmergency call-outs and repairs.
LedwellRural breakdowns and reliability fixes.
Over NortonSliding gates, rollers and racking faults.
KiddingtonEstate gates and access control integration.
If your town or village is not listed, call anyway.
Coverage is route-based and we can often include nearby locations.
Electric Gate Systems We Repair in Great Tew
Electric gates fail for different reasons depending on the gate type, site conditions and duty cycle. Therefore, we match repairs and parts to the exact system type. That way, the fix is durable, not temporary.
Swing Gate Automation
Rams, arms and underground motors for residential and estate swing gates.
We check geometry, hinge resistance, limits and safe reverse behaviour.
Sliding Gate Automation
Rack-and-pinion systems on tracked or cantilever gates.
We check rollers, track, rack alignment, run-back and safety edges.
Control Panels & Electronics
Boards, fuses, relays, capacitors, transformers and wiring integrity.
We test inputs/outputs and fault indicators.
Safety & Access Control
Photocells, safety edges, loop detectors, intercom triggers, keypads and GSM diallers.
We confirm correct stop/reverse response.
Not sure what you have?
If safe, send a clear photo of the controller label and a short video of the fault. We’ll advise quickly.
If safe, send a clear photo of the controller label and a short video of the fault. We’ll advise quickly.
What We Check on an Electric Gate Call-Out
An electric gate is a system, not just a motor. Therefore, we check the full chain from power to movement to safety and access control. This reduces repeat faults and avoids unnecessary part changes.
- Power and protection: supply, isolators, fuses, transformer outputs, enclosure sealing and water ingress signs
- Control logic: board status, settings, inputs, outputs, fault indicators and safe reaction behaviour
- Safety inputs: photocells, safety edges, loop detectors, stop circuits and wiring integrity
- Drive components: motor condition, hinges/rollers, rack alignment, track condition and mechanical resistance
- Access control: remotes, receivers, antennas, keypads, intercom relays and cabling
- Commissioning checks: forces, limits, slow-down, stop/reverse response and smooth travel
As a result, you get a repair that restores reliable operation and improves safety.
Common Electric Gate Problems We Fix
Faults often look similar even when causes are different. However, testing separates a safety hold-off from a motor or controller failure. That’s why we follow a consistent diagnostic order.
Gate won’t open or closeSupply/fuse faults, safety circuit active, board failures.
Stops halfway or reversesResistance, drag, force settings, safety triggers.
Remote works intermittentlyReceiver/antenna faults, interference, wiring issues.
Photocells not respondingMisalignment, water ingress, impact damage, broken cables.
Gate beeps but does not moveSafety input preventing movement or control lockout.
Noisy or slow movementMechanical resistance, worn rollers, hinge issues.
Both leaves stop togetherShared safety circuit issue, controller/power issue.
Gate drags or hits groundHinge drop, post movement, track wear or foundation issues.
Therefore, if your gate is behaving unpredictably, stop using it and call us for advice.
Who We Help With Electric Gate Repairs
We support homeowners and businesses in and around Great Tew. In addition, we help estate managers, property managers and facilities teams who need safe, documented repairs and clear next steps.
HomeownersReliable access, smoother travel and safer daily use.
Estates & Managed SitesMultiple users, controlled access and planned maintenance.
BusinessesTraffic flow, deliveries and higher duty cycles.
Property & Facilities ManagersClear next steps and safety-first recommendations.
Electric Gate Safety and Compliance
Electric gates are machinery. Therefore, safety devices, correct settings and safe stop/reverse behaviour matter. We check key safety functions and advise on any gaps.
Safety edgesReduce crush and shear risks at pinch points.
PhotocellsDetect people and vehicles, preventing unsafe movement.
Force behaviourCorrect stop/reverse response reduces impact risk.
Manual releaseRelease keys and safe access in fault conditions.
If a safety device is missing or not working, the gate may be unsafe.
We can repair, replace or upgrade safety devices, then test and commission correctly.
We can repair, replace or upgrade safety devices, then test and commission correctly.
Emergency Electric Gate Repair Great Tew
If your gate is stuck open, stuck shut, damaged, or creating a safety risk, call us. First, we make it safe. Then we restore reliable operation. After that, we advise on improvements to reduce repeat failures.
Keep people clear of moving parts until the gate has been made safe.
Call-Out Charges & Pricing
What the Call-Out Covers
The call-out includes travel, diagnostics, and the first hour on site. Therefore, many faults are resolved within the included time.
✓
Diagnostics & testing
✓
Safety input checks
✓
Control & settings checks
✓
Clear next steps
Standard Labour Rate
£80 + VAT per hour
Diagnostics, repairs, safe testing and fault finding.
Call-Out Rates
Standard Call-out
Mon–Fri 9–5pm
£160 + VAT
Includes travel + first hour on site.
Additional hours after the first hour: £80 + VAT/hr
Out of Hours Call-out
Evenings & weekends
£320 + VAT
Includes travel + first hour on site.
Additional hours after the first hour: £160 + VAT/hr
Bank Holiday Call-out
Christmas, Easter & bank holidays
£480 + VAT
Includes travel + first hour on site.
Additional hours after the first hour: £240 + VAT/hr
Key Info
Transparent pricing — we confirm costs before work starts.
Parking/tolls and any applicable charges are charged at cost where applicable.
Parts and upgrades confirmed before supply and fit.
Electric Gate Repair Great Tew FAQs
Getting the Right Fix
Do you repair electric swing and sliding gates in Great Tew?
Yes.
We repair electric automation on swing gates and sliding gates in Great Tew and nearby areas.
In addition, we diagnose control boards, receivers, and safety devices.
My electric gate has power but won’t move. What does that usually mean?
Often, a safety input is holding the gate off.
For example, photocells, a safety edge, a stop circuit, or a loop detector can prevent movement.
Therefore, we test the full safety chain before changing parts.
Why does my gate stop halfway or reverse?
Usually the system is detecting resistance or a safety device is triggering.
For example, hinge or roller drag, rack misalignment, force settings, or a photocell issue.
Therefore, we test both mechanics and safety inputs to find the real cause.
Can you repair older gate control panels and obsolete systems?
In many cases, yes.
First, we identify the controller and motor type.
Then we confirm parts availability.
If a part is obsolete, we recommend an upgrade path that keeps the gate safe and reliable.
Safety, Servicing & Access
Do you replace photocells and safety edges?
Yes.
We repair or replace photocells and safety edges, then commission the system so it stops or reverses correctly.
This is especially important on older installations.
How often should an electric gate be serviced?
At least annually for most homes.
However, higher-use sites often need more frequent servicing.
Servicing reduces failures and helps the gate operate smoothly and safely.
Can you fix remote range and supply additional remotes?
Yes.
First we test the remote battery.
Then we test the receiver and antenna.
After that, we check for interference or cable faults.
If the receiver is obsolete, we can upgrade it and supply new remotes.
Can you integrate keypads, intercoms, or GSM diallers?
Yes.
We can diagnose and wire access control devices into the control board.
In addition, we can tidy wiring and protect connections to improve reliability.
Response & Costs
Do you offer emergency electric gate repairs in Great Tew?
Yes.
Same-day and emergency call-outs are available where possible.
If your gate is stuck open, stuck shut, or unsafe, call us for priority help.
How much does an electric gate repair call-out cost?
Our call-out pricing is clear:
- Standard hours: £160 + VAT includes travel and the first hour
- Out of hours: £320 + VAT includes travel and the first hour
- Bank holidays: £480 + VAT includes travel and the first hour
What information should I send before you attend?
Your postcode, gate type (swing or sliding), and what the gate is doing.
If safe, a short video of the fault and a photo of the controller label helps us diagnose faster.
As a result, we can arrive with the right parts where possible.
Request a Quote / Callout
Tell us what’s happening and we’ll respond quickly. For the fastest help, include your postcode, gate type (swing/sliding), and any motor/controller details if known.
Fast booking options
Or email: info@gaterepairer.co.uk
Tip: If safe, a short video of the gate opening/closing and a photo of the control panel label helps us diagnose faster.
